Lindab Registers & Drum Louvers
9094 Leslie St, Unit #7, Richmond Hill, ON Canada L4B 3L9
Lindab registers and drum louvers are ideal for direct mounting on spiral ducts. The register is to be mounted without the use of rectangular grille boxes. The top and bottom flanges meet flush with the spiral duct regardless of duct diameter. The RGS-3 registers can be easily instaslled by the contractor or available pre-mounted on fitting or spiral bodies.
DRLAA drum louvers are built with a single bank of adjustment vanes that also provides control for the direction and length of air stream. DRLAA drum louvers and registers can be installed in either horizontal or vertical orientations to meet architectural and engineering design conditions for reliable performance. DRLAA grilles and registers efficiently distribute anywhere from 200 through 10,000 CFM and are available in 6 x 12 through 10 x 72" sizes.
RGS-3
DRLAA
Dimensions
The RGS-3 is a supply/return register with adjustable double deflection blades and a volume damper disgned specifically for direct mounting on to spiral duct. The use of rectangular taps are not required. The volume damper shall be of the single blade type manufactured from 22 gauge electro-galvanized steel.
The register is contoured to always meet flush with the ductwork regardless of the duct diameter. Gasket material is installed around the neck of the register to prevent air leakage. A template is provided to simplify the installation process.
DRLAA series supply drum louvres are recommended for theatres, convention halls, arenas, factories and shopping centres; anywhere requiring long or short throws. Air flow patterns are adjustable in both the horizontal and vertical planes for maximum versatility
The unique extruded aluminum universal mounting frame results in low installation costs and will adapt to a variety of duct sizes without requiring any expensive or unsightly duct taps.
Phone: (905) 771-8898 Fax: (905) 764-8188
Lindab Comfort Register Catalogue
